INSTALLING THE DUAL FUEL CARBURETOR Installing the dual fuel carburetor is very easy, it is as simple as installing a normal carburetor on your generator. Step One: Remove the air filter. When installing the dual fuel carburetor the first thing to look out for is the air filter of the generator. The carburetor is always behind it. The first thing to do is to remove the air filter by opening the cover and unscrewing all the screws fastening it to the carburetor Step Two: Disconnect the throttle and the fuel hose. Before disconnecting the fuel hose ensure you turn off the fuel tap from the generator. Also, take care not to damage the gaskets else you have to change them if they are damaged. Step Three: Remove the former carburetor by pulling out of the stud. Step Four: Plug in the dual fuel carburetor. Before plugging it in, ensure that you insert the gaskets. Ensure that it is well pushed in to the engine. Step Five: Insert the throttle and the spring attached...
Get information about the latest cool products at affordable prices here.